Turn on Progressive Scan
When you connect a TV with the component
video connection (see chapter 'Connect video
cables - Option 2: Connect to component
video socket' for details), you can set the
progressive scan output if your TV supports
progressive scan.
1
Turn on the TV to the correct viewing
channel for this unit.
2
Press DISC.
3
Press OPTIONS.
4
Press V to select
menu, then press B.
Video Setup
TV Type
TV Display
Progressive
Picture Setting
HDMI Setup
Closed Caption
5
Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
6
To proceed, select [ OK ] in the menu and
press OK.
The progressive setup is complete.
EN
20
1_hts3565-69_98_eng5_Final808.in20 20
1_hts3565-69_98_eng5_Final808.in20 20
[ Video Setup ] in the
Off
On
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
•
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press b.
3) Press AUDIO SYNC.
7
To exit the menu, press OPTIONS.
8
You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
•
There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both this unit and
your TV.
2008-02-19 3:42:06 PM
2008-02-19 3:42:06 PM