Front Cover - Janome NH40 Service Manual

SERVICE ACCESS (4)

FRONT COVER

TO REMOVE:
1. Remove the face cover, bed cove and free-arm cover (see page 4–6).
2. Loosen the setscrew (A) and (B) then remove the setscrew (D) and (E).
3. Remove the cap and loosen setscrew (C).
4. Disconnect all the connectors from the circuit board-A (see page 20).
NOTE:
Do not disconnect the connectors by pulling on cord.
To disconnect, grasp the connector, not the cord.
Remove the presser lifter from the front cover first while presser lifter lowered.
(To be continued)
Cap
Setscrew (A)
Setscrew (C)
Setscrew (E)
Cap
Setscrew (D)
Setscrew (B)
7