Setups; Tv Shape; Hdmi Video Resolution - Philips HTS3251B/F7 User Manual

TV Shape

"Advanced
home "Settings"
Setup"
Use this feature to adjust the aspect ratio of the video
source which is different from your TV's ratio to fit your TV
monitor without distorting the picture. Descriptions of
each setting are as follows:
Video Your
source TV
4:3 Normal
4:3 Crop
4:3
16:9
16:9 Widescreen
16:9 Squeeze
16:9
4:3

HDMI Video Resolution

"Advanced
home "Settings"
Setup"
Set the resolution of the video signal being output from
the HDMI OUT jack.
You can select the desired "HDMI Video Resolution"
among the settings listed below:
"Auto","480p","720p","1080i","1080p"
• When you make a selection, the TV monitor temporarily
goes blank and then comes back again. If it does not,
press and hold [B (play)] on the front panel for 5
seconds to change the setting back to its default.
48 EN

SETUPS

"Video Output" "TV Shape"
Option Description
To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
both sides of the
picture fits the 4:3
TV.
To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.
"Video "HDMI "HDMI Video
Output" Video" Resolution"
Actual Output Resolution by Media:
Media
Setting in
the "HDMI
Video
480i/60 720p/60
Resolution"
480p 480p/60 480p/60
720p 720p/60 720p/60
1080i 1080i/60 1080i/60
1080p/60 1080p/60 1080p/60 1080p/60 1080p/24
1080p
The highest resolution supported by your display device
Auto
will be in effect automatically.
(*1)
To output the video in 24 Hz, the connected display device must
support 24 Hz output, and "HDMI 1080p/24" should be set to "Auto".
Otherwise, the image will be output in 60 Hz.
Media DVD
Setting in the
"HDMI Video
480i/60 60, 30, other
Resolution"
480p 480p/60
720p 720p/60
1080i 1080i/60
1080p 1080p/60 1080p/60
The highest resolution supported by your display
Auto
device will be in effect automatically.
• When HDMI cable is connected, only "480i" and the
resolution selected in the "HDMI Video Resolution" will
be available for the "Component Output".
• Composite video out (VIDEO OUT) can only output
480i/60.
• For DivX®, outputting the video in 24 Hz (1080p/24) is not
available.
Note
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI cable
and if you select "Auto", "480p" will be in effect
automatically.
• Pressing [B (play)] on the front panel for 5 seconds
changes the setting back to its default. ("Component
Output" setting will also be reset to default (480i).)
• Refer also to your TV's manual.
BD
Source
1080i/60 720p/24 1080p/24
480p/60 480p/60 480p/60
720p/60 720p/60 720p/60
1080i/60 1080i/60 1080i/60
or 60
Photo OSD-only
DivX®
viewing viewing
Source
480p/60 480p/60 480p/60
720p/60 720p/60 720p/60
1080i/60 1080i/60 1080i/60
1080p/60 1080p/60
(*1)