Philips HTS3251B/F7 User Manual page 43

Category
Video HDMI Video
Output
Component Output
De-interlacing Mode
Black Level
HD Noise Reduction
LIST OF SETTINGS
Menus / Options
HDMI 1080p/24 Auto
Off
• This feature is available
only when the display
device is connected by
an HDMI cable.
• Refer to page 48 for
more information.
HDMI Video Resolution* Auto
• This feature is available
480p
only when the display
720p
device is connected by
1080i
an HDMI cable.
1080p
• Refer to page 48 for
more information.
HDMI Deep Color Auto
• This feature is available
Off
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
480i
480p
720p With regard to DVD-video
1080i with copy protection, the
resolution will be set to
480p regardless of the
setting here.
If 480p output is not
available, 480i will be
output.
Auto
Video
On
Off
On
Off
Description
"Auto":
Outputs the picture in 1080p/24
(1080 progressive with 24 frames per
second) when it meets all the
conditions listed below:
• The video resolution and the frame
rate of the material is 1080p/24 .
• "HDMI Video Resolution" setting is
set to "1080p".
• The display device supports the
1080p/24 output.
"Off":
• Outputs the picture in 1080p/60.
(60 frames per second, progressive)
Sets the resolution of the video signal
being output from the HDMI OUT jack.
• The selected resolution must also be
supported by your TV monitor.
Reduces the posterization effect of
the playback picture.
"Auto":
Reduces the posterization effect by
automatically outputting up to 36 bit
color whenever the unit recognizes
the connected display device
supports Deep Color feature.
"Off":
Outputs the standard 24 bit color.
Sets resolution for component output
picture.
• The selected resolution must also be
supported by your TV monitor.
• Refer also to your TV's manual.
• If you have selected the resolution
not supported by your TV by mistake
and the picture gets disturbed, press
and hold [B (play)] on the front
panel for 5 seconds to change the
setting back to its default.
• When HDMI cable is connected, only
"480i" and the resolution selected in
the "HDMI Video Resolution" will be
available.
"Auto":
Automatically detects film or video
content, and appropriately converts it.
"Video":
Select this option when the picture is
distorted when using "Auto".
Adjusts brightness to compensate for
ambient room light.
Reduces noise of the playback picture.
"On":
Activates Noise Reduction.
"Off":
Deactivates Noise Reduction.
EN
EN
43