Service Mode; Aging Mode - Denon DVD-3800 Service Manual

QQ
3 7 63 1515 0

Service Mode

1. Aging Mode

(1) Preparation
(a) Equipment used: Any one of DVD Karaoke Disc (containing more than 10 titles), CD/Video CD (Ver1.0: None
playback control), or No-menu DVD. (Setting varies according to the disc used.)
(b) Unit setting: No spec other than the following procedure (Aging mode)
At the tray open status, press the "POWER" button to turn on the power while pressing the "PLAY" and
"OPEN/CLOSE" buttons for DVD operation simultaneously.
run mode.
(2) Procedure
(a) According the above, set to the aging mode.
(b) Set a DVD Karaoke disc to the tray and press the "PLAY" button once.
(after playback title-1 and title-10 of the disc, the tray open/close is made automatically, then playback the title-1
again) starts. This aging operation continues automatically until it is stopped or it stops caused by an error.
(c) When using other than a DVD Karaoke disc, aging operation (after playback all titles of the disc, the tray open/close
is made automatically, then playback all titles again) starts by pressing the "PLAY" button once, and
the FL lights. The aging operation continues automatically until it is stopped or it stops caused by an error. In case
of some error in DVD, the tray opens and the following error messages are displayed on the FL.
No.
1
2
3
4
TE
L 13942296513
5
6
7
8
9
2. Initial Setting Mode
(1) Preparation
(a) Equipment used: None
(b) Unit setting: No spec other than the following procedure
(2) Procedure
(a) Initialize the DVD player when µcom, peripheral parts of µcom, or Main P.W.B. has been replaced in servicing.
(b) Carry out the following to restore factory setting mode. At the player stop condition, press 3 buttons for DVD peration
("PLAY", "OPEN/CLOSE", and "
("Initialized" appears and disappears on the TV screen.)
(c) All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to
memorize your setting for restoring again after the initialization.
www
.
http://www.xiaoyu163.com
Error contents
During tray work, it doesn't end within the time specified.
No spindle work during playback.
Out of focus during playback, search, or pause.
No data read when spin up.
No data read when playback.
Cannot read TOC within the time specified.
No sub-code read
No response from DVD drive more than 10 sec.
Error not specified (other than above).
SKIP") until "INITIALIZE" appears and disappears in the FL.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
mark on the FL lights, and the unit is set to the heat
mark on the FL blinks, and aging peration
Error code
045300
040990
031100
031100
Q Q
3 6 7 1 3 1 5
031100
025700
025700
0B4000
---
co
.
DVD-3800
9 4 2 8
mark on
FL display
ERROR 01
ERROR 02
ERROR 04
ERROR 04
0 5 8 2 9 9 4 2 8
ERROR 04
ERROR 05
ERROR 05
ERROR 06
ERROR 07
m
9 9
9 9
11