Storing The Appliance; Servicing The Appliance; Changing The Plug - Russell Hobbs RHEM21L Instructions And Warranty


Please do not dispose this appliance into the domestic rubbish bin; it should be disposed to the
particular disposal center provided by the municipalities.

Do not use bleach or other abrasive substance or solvents to clean your appliance as it can be
damaging to the finish.

STORING THE APPLIANCE


Unplug the unit from the electrical outlet and clean all the parts as instructed above. Ensure that all parts
are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still wet or dirty.

Never wrap the power cord around the appliance.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating correctly, please check the
following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem and you need to
return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent, in order to
avoid any hazard. If service becomes necessary within the warranty period, the appliance should be returned to
an approved Amalgamated Appliance (Pty) Ltd service centre. Servicing outside the warranty period is still
available, but will, however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 230V~240V current only. Connecting to other power sources may
damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live