Important; Safety And Important Notice - Philips HTR5224 User Manual

1 Important

Safety and important notice

Warning
•
Risk of overheating! Never install the digital
receiver in a confi ned space. Always leave a
space of at least 4 inches around the digital
receiver for ventilation. Ensure curtains or
other objects never cover the ventilation slots
on the digital receiver.
•
Never place the digital receiver, remote
control or batteries near naked fl ames or
other heat sources, including direct sunlight.
•
Only use this digital receiver indoors. Keep this
digital receiver away from water, moisture and
liquid-fi lled objects.
•
Never place this digital receiver on other
electrical equipment.
•
Keep away from this digital receiver during
lightning storms.
•
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Visible and invisible laser radiation when open.
Avoid exposure to beam.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC, 2006/95/EC
EN
4
Mains fuse (UK only)
This Digital Receiver is fi tted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (example 10A).
1
Remove fuse cover and fuse.
2
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3
Refi t the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord.