Related Manuals for Philips HTB2510
Summary of Contents for Philips HTB2510
- Page 1 Always there to help you Register your product and get support at www.philips.com/support HTB2510 Question? Contact Philips User manual...
- Page 3 Contents 1 Important 6 Update software Safety Check software version Care for your product Update software through USB Care of the environment 7 Product specifications 2 Your home theater Main unit 8 Troubleshooting Remote control Connectors 9 Notice Copyright 3 Connect and set up Open source software Connect speakers Connect to TV...
-
Page 4: Important
1 Important back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to this product! Read and understand all instructions before you • Never place the product or any objects use your product. If damage is caused by failure on power cords or on other electrical to follow instructions, the warranty does not equipment. -
Page 5: Care For Your Product
Ensure that the battery Congratulations on your purchase, and compartment is completely secure after welcome to Philips! To fully benefit from the you replace the battery. support that Philips offers (e.g. notification •... -
Page 6: Remote Control
Front panel Indication Remote control display Coaxial In This section includes an overview of the HDMI ARC remote control. Setup List of files on disc/USB Mute (Standby-On) • Switch the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. -
Page 7: Connectors
b SOURCE o Alphanumeric buttons Select a source: Radio/HDMI ARC/AUX/ Enter values or letters (using SMS style OPTICAL/COAXIAL/AUDIO IN for the entry). home theater. p SUBTITLE (Home) Select subtitle language for video. Access the home menu. q AUDIO d DISC MENU Select an audio language or channel. -
Page 8: Connect And Set Up
3 Connect and set (USB) Audio, video or picture input from a USB storage device. Note This section helps you connect your home • When you connect an MP3 player to the home theater theater to a TV and other devices, and then set with a 3.5mm audio cable, make sure that you connect the MP3 player to the AUDIO IN connector, not to it up. -
Page 9: Connect To Tv
REAR LEFT (rear left) and REAR RIGHT (rear right) speakers: Place the rear surround speakers to the left and right side of your seating position, FRONT FRONT FRONT WOOFER LEFT RIGHT CENTER either in line with it or slightly behind it. SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. -
Page 10: Connect Audio From Tv And Other Devices
On your TV, turn on HDMI-CEC connected through HDMI to be operations. For details, see the TV user controlled by a single remote control, manual. such as volume control for both the • HDMI-CEC is a feature that enables TV and the home theater. (see 'Set CEC compliant devices that are up EasyLink (HDMI-CEC control)' on connected through HDMI to be... -
Page 11: Set Up Speakers
Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device. • Philips does not guarantee 100% interoperability with all HDMI-CEC devices. Before you start • Connect your home theater to the HDMI- CEC compliant device through HDMI connection. -
Page 12: Enable Easylink
Enable EasyLink Set up the audio If you cannot hear the audio output of a Press (Home). connected device through your home theater Select [Setup], and then press OK. speakers, do the following: Select [EasyLink] > [EasyLink] > [On] . •... -
Page 13: Use Your Home Theater
4 Use your home Auto play disc theater When the home theater is switched on, the disc automatically plays. Press (Home). Select [Setup], and then press OK. This section helps you use the home theater to Select [Preference] > [Auto play disc]> play media from a wide range of sources. -
Page 14: Data Files
Play buttons Synchronize video and sound If the audio and video are not synchronized, Button Action delay the audio to match the video. Navigation Navigate menus. buttons Up/Down: Rotate the picture Press . clockwise or counter-clockwise. Press the Navigation buttons (left/right) to Left/Right: Skip to the previous or select [Audio sync], and then press OK. -
Page 15: Usb Storage Devices
Character Language Note • To play DivX DRM protected files, connect your home [Greek] Greek theater to a TV through an HDMI cable. [Baltic] Estonian, Latvian and Lithuanian [Chinese] Simplified Chinese [Chinese- Traditional Chinese Subtitles Traditional] [Korean] English and Korean If your video has subtitles in multiple languages, select a subtitle language. -
Page 16: Audio, Video, And Picture Options
Select [Browse USB], and then press OK. [Subtitle language]: Select subtitle • » A content browser is displayed. language for video. • [Subtitle shift]: Change the subtitle Select a file, and then press OK. position on the screen. Press the play buttons to control play (see [Time search]: Skip to a specific part •... -
Page 17: Radio
[Zoom]: Zoom into a video scene or Press SOURCE repeatedly to switch to • picture. Press the Navigation buttons radio source. (left/right) to select a zoom factor. » If you have already installed the radio [Duration per slide]: Select the display •... -
Page 18: External Audio Device
Tuning grid Play karaoke music In some countries, you can toggle the FM tuning While playing a karaoke disc, press grid between 50 kHz and 100 kHz. » The options menu is displayed. Press SOURCE repeatedly to switch to Press the Navigation buttons to select radio source. -
Page 19: Surround Sound Mode
Press to exit. Front panel Indication Description • If you do not press a button within a display minute, the menu exits automatically. [Auto] Automatically select a sound setting based on Surround sound mode the sound stream. Experience an immersive audio experience with [Balanced] Experience the surround sound modes. -
Page 20: Change Settings
5 Change settings Auto volume Turn on auto volume to reduce sudden changes in volume, for example, during TV commercials. The home theater settings are already Press . configured for optimal performance. Unless Select [Auto volume], and then press OK. you have a reason to change a setting, we Press the Navigation buttons (up/down) recommend that you keep the default setting. -
Page 21: Picture And Video Settings
[HDMI audio]: Set the HDMI audio • Picture and video settings output for your TV. • [Audio sync]: Synchronize the audio with the video. Press (Home). [Speaker setup]: Set up speakers for • Select [Setup], and then press OK. best surround sound experience. Select [Video], and then press OK. -
Page 22: Energy Saving Settings
Energy saving settings Restore default settings Press (Home). Press (Home). Select [Setup], and then press OK. Select [Setup], and then press OK. Select [Preference], and then press OK. Select [Advanced] > [Restore default settings], and then press OK. Press the Navigation buttons and OK to Select [OK], and then press OK to select and change: [Screen saver]: Switch the home... -
Page 23: Update Software
» The files are extracted under the UPG • Do not install a lower version of software than the current version installed on your product. Philips is not folder of your USB flash drive. liable for problems caused due to software downgrade. -
Page 24: Product Specifications
7 Product Audio formats specifications Your home theater supports the following audio files. Exten- Con- Audio Bit rate sion tainer codec Note .mp3 Up to 320 kbps • Specifications and design are subject to change without .wma Up to 192 kbps notice. - Page 25 .avi files in AVI container (or .ts files in TS .mkv files in MKV container container) Audio codec Video codec Bit rate Audio codec Video codec Bit rate PCM, AC-3, DivX Plus HD 30 Mbps PCM, AC-3, DivX 3.11, 10 Mbps max DTS core, DTS core, DivX 4.x, MPEG, MP3, MP3, WMA, DivX 5.x, WMA, AAC, DivX 6.x HE-AAC,...
- Page 26 Amplifier Main unit • Total output power: • Power supply: 110-240 V~, 50-60 Hz 300W RMS (10% THD) • Power consumption: 60 W • Frequency response: 20 Hz-20 kHz / ±3 dB • Standby power consumption: ≤ 0.5 W • Signal-to-noise ratio: •...
-
Page 27: Troubleshooting
Output power (Max. ratings): the following points before you request service. 20 mW (BD), 6 mW (DVD), 7 mW (CD) If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the home theater do not work. - Page 28 • Make sure that the home theater is to select [Audio sync], and then press connected to a Philips brand EasyLink TV, and the EasyLink option is turned on (see 3) Press the Navigation buttons (up/ 'Set up EasyLink (HDMI-CEC control)' on down) to synchronize the audio with page 9).
-
Page 29: Notice
U.S. patents after mailing to this email address, please and other intellectual property rights of write in English to “Open Source Team, Philips Rovi Corporation. Reverse engineering and Intellectual Property & Standards, P.O. Box 220, disassembly are prohibited. -
Page 30: Language Code
10 Language code Inupiaq 7375 Pushto 8083 Abkhazian 6566 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486... -
Page 31: Index
11 Index data files deep color default settings disc language 2nd audio language disc menu 2nd subtitle language display panel disposal DivX 5.1 speakers Easylink (HDMI-CEC) eject disc advanced settings enhanced audio amplifier environment audio connection (HDMI ARC) audio formats audio from other devices audio language factory settings audio options... - Page 32 night mode troubleshooting (picture) troubleshooting (play) troubleshooting (sound) tuning grid one-touch play one-touch standby options USB storage device parental control PBC (play back control) picture options video connection (HDMI ARC) picture resolution video connection (standard HDMI) picture settings video formats picture-in-picture video options play disc...
- Page 33 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are ‘Blu-ray Disc ‘ and ‘Blu-ray Disc ‘ logo are trademarks or registered trademarks of HDMI trademarks of Blu-ray Disc Association. Licensing LLC in the United States and other countries.
- Page 34 Specifications are subject to change without notice © 2015 Koninklijke Philips N.V. All rights reserved. Trademarks are the property of Koninklijke Philips N.V. or their respective owners. HTB2510_98_UM_V1.0...