Connections; Step 1: Set Up The Speakers; Step 2: Placing The Speakers And Subwoofer - Philips HTR HTR5000 User Manual

Connections

Step 1: Set up the speakers

You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
– The rear speakers are labelled as REAR L
(left) or REAR R (right).
– The front speakers are labelled as
FRONT L (left) or FRONT R (right).
6
Step 2: Placing the speakers
and subwoofer
Centre
AV Receiver speaker
2
Front Speaker
(Left)
1
4
3
Rear speaker Subwoofer
(Left)
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
1
Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
2
Place the centre speaker above the TV or
the AV receiver so that the centre
channel's sound is localised.
3
Place the rear speakers at normal
listening ear level facing each other or
mounted on the wall.
4
Place the subwoofer on the floor near
the TV.
Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– Allow adequate ventilation around the AV
receiver.
2
Front Speaker
(Right)
1
3
Rear speaker
(Right)
8239 300 38591