I nstal lation
A) Attach liftin g bar assembly to circuit breaker as
shown above. Screw locking screws throug h circuit
breaker side plates and lifting plates.
C) Carefully begin lowering circuit breaker onto rails.
I M PORTANT: Lift up on front of circuit b reaker,
tilting rear downward until side frame engages
notch at the rear of the right rai L
B) Carefully raise circuit breaker and move into posi
tion above fulfy extended rails.
D) Continue lowering until circuit breaker rests secure
ly on the rails. Remove the lifting bar. The circuit
breaker is now ready for inserting into the cell.
1 . Handling Instructions
Figure
5