Siemens RL Instruction Manual page 2

Hazardous voltages and high- speed moving parts.
Will cause death, serious personal injury or equipment
damage.
Always de-energize and ground the equipment before
maintenance. Maintenance should be performed only by
qualified personnel. The use of unauthorized parts in the
repair of the equipment or tampering by unqualified personnel
will result in dangerous conditions which will cause severe
personal injury or equipment damage. Follow all safety
instructions contained herein.
The information contained herein is general in nature and not intended for
specific application purposes. It does not relieve the user of responsibility to
use sound practices in application, installation, operation, and maintenance of
the equipment purchased. Siemens reserves the right to make changes in the
specifications shown herein or to make improvements at any time without notice
or obligations. Should a conflict arise between the general information contained
in this publication and the contents of drawings or supplementary material or
both, the latter shall take precedence.
For the purpose of this manual a qualified person is one who is familiar with the
installation, construction or operation of the equipment and the hazards in­
volved. In addition, this person has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag circuits
and equipment in accordance with established safety practices.
(b) is trained in the proper care and use of protective equipment such as
rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc.,
in accordance with esta b lished safety practices.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equipment,
nor to provide for every possible contingency to be met in connection with
installation, operation, or maintenance. Should further information be desired or
should particular problems arise which are not covered sufficiently for the
purchaser's purposes, the matter should be referred to the local sales office,
listed on back of this instruction guide.
The contents of this instruction manual shall not become part of or modify any
prior or existing agreement, commitment or relationship. The sales contract
contains the entire obligation of Siemens Energy
ranty contained in the contract between the parties is the sole warranty of
&
Siemens Energy Automation, Inc. Any statements contained herein do not
create new warranties or modify the existing warranty.
A DANGER
IMPORTANT
QUALIFIED PERSON
SUMMARY
&
Automation, Inc. The war­