Location And Function Of Parts And Controls; Sx-M700A Control Unit - Sony SX-M700A Operating Instructions Manual

Location and Function of Parts and Controls

SX-M700A Control Unit

Front panel
1
POWER switch
2
PHONES connector
3
Rear panel
0
EXT UNIT IN/OUT connectors
qg
INTERPRETER'S
UNIT connectors
qf
EXT IN-2 MIC/LINE connectors and MIC/LINE switch
1
POWER switch
Setting the switch to ON (!) turns the power on. The
level meter will light.
Setting the switch to OFF (a) turns the power off.
2PHONES connector (stereo phone jack)
Connect 8-ohm stereo or monaural headphones. Note
that the output is monaural even when stereo
headphones are connected.
8
MONITOR volume control
4
MONITOR channel selector
5
Level meter
qa
EXT IN-1 MIC/LINE connectors and MIC/LINE switch
qh
DELEGATE'S/CHAIRMAN'S UNIT
connectors
6
ORIGINAL volume controls
7
qs
LINE OUT connectors
qd
TV conference system, etc. connecting section
qj
U terminal
3MONITOR volume control
Adjusts the volume of the headphones.
4MONITOR channel selector
Selects the channel corresponding to the interpreted
language to be monitored through the headphones
(INTERPRETER CHANNEL 1 to 6). To monitor the
original speech, set the selector to ORIGINAL.
MIC LIMIT ON/OFF button
8
DIRECT ACCESS
ON/OFF button
9
SEAT ASSIGN
START/END button
qk
AC IN connector