STEP 1:
Tighten the Front stabilizer(2) and Rear stabilizer(3) to the Main frame (1) with the Carriage
Bolt(46)、Arc Washer(42) and Acorn nut(47).
STEP 2:
1. Lock the Swing bar(4L/R) to the Main frame (1)with Handlebar shaft(12)、Bolt(57)、Spring
washer(52) , D shape washer(56) and Washer(73). (NOTE: Don't lock the screw too tight
now.)
2. Fix the Right pedal support(6R) to the Crank(27) with Bolt (62R)、Spring washer (51) and
Right nylon Nut (48R), then lock tight with Bolt(57), Right bolt(62R) and Right Nylon nut
(48R). Lock the Left pedal support(6L) in the same way..
Remark: The bolt in the Pedal has two directions: right and left. The right should be spine in
clockwise direction while the left should be spine in counterclockwise direction. When you spin,
you could choose a best direction in order to spin the bolt easily.
Assembly Instruction
5