1
General
The Electrical Installation Instructions describe the procedures for installing all of the
hardware and software needed to perform testing, calibration, and repair activities at an
Electrical level for the Sony Ericsson products specified.
2 Go/No Go Testing
There are two options for performing a Go No/Go test. One is to use an RF Fixture and
the other is to use an antenna coupler together with a shielding box.
2.1
Test Set-Up Go/No Go test
All test hardware necessary for this test set up is documented in the Mechanical or
Electrical Equipment Lists.
PRINT ER
OPT IONAL
T he RF Probe Holder and the Battery Cover may not be used for every produc t.
*
S ee the Installation Instructions and T est Instruc tions for details.
1208-3975 1
©
Sony Ericsson Mobile Communications AB
GPIB
CABLE
T ES T S ET
RF CABLE
RF S HIELD
BOX
BAT T ERY AND
BAT T ERY COVER
Installation Instruction, Electrical
COMPUT ER
OPT IONAL
RF PROBE
*
HOLDER
RF PROBE
OPT IONAL
*
2(11)