Sony STR-DN1080 Operating Instructions Manual page 42

Enjoying sound from speakers
located in other rooms using
another amplifier (Zone 2)
1
Connect another amplifier
located in Zone 2 (page 34).
2
Turn on the receiver in main
zone and the amplifier in
Zone 2.
3
Set the volume control for
Zone 2.
Press HOME, then select [Setup] – [Zone
Settings] – [Zone2 Line Out] – [Variable]
or [Fixed].
 [Variable]: The volume for the ZONE 2
OUT jacks can be changed. Select this
when using another amplifier that does
not have volume control.
[Fixed]: The volume for the ZONE 2 OUT

jacks is fixed. Select this when using
another amplifier with variable volume
control.
4
Press HOME, then select [Zone
Controls] – [Zone2] – [Zone2
Power] – [On].
You can also press ZONE SELECT on the
receiver repeatedly to select "ZONE 2",
then press ZONE POWER on the receiver.
5
Select [Zone2 Input], then
select the source signals you
want to output.
You can also turn INPUT SELECTOR on the
receiver while "2. xxxx"* appears on the
display panel.
Tip
If you want to listen to the same sound as main
zone in zone 2, select [SOURCE].
6
Start playback on the selected
input device.
GB
42
7
Adjust the volume.
Adjust the volume using the amplifier in
Zone 2.
If you set [Zone2 Line Out] to [Variable] in
step 3, select [Zone2 Volume] then adjust
the volume. You can also turn MASTER
VOLUME on the receiver while "2. xxxx"*
appears on the display panel.
* "xxxx" is the input name.
To exit zone operation
Set [Zone2 Power] to [Off] in step 4.
Enjoying video and sound in
another room using a TV or
another amplifier (HDMI zone)
1
Connect another amplifier or
TV in other room (page 35).
2
Turn on the receiver in main
zone, the amplifier and TV in
HDMI zone.
3
Set the assignment for the
HDMI OUT B/HDMI ZONE jack
to [Zone].
Press HOME, then select [Setup] – [HDMI
Settings] – [HDMI Out B Mode] – [Zone].
4
Press HOME, then select [Zone
Controls] – [HDMI Zone] –
[HDMI Zone Power] – [On].
You can also press ZONE SELECT on the
receiver repeatedly to select "HDMI
ZONE", then press ZONE POWER on the
receiver.
5
Select [HDMI Zone Input], then
select the source signals you
want to output.
You can also turn INPUT SELECTOR on the
receiver while "H. xxxx"* appears on the
display panel.
* "xxxx" is the input name.