Table of Contents
Advertisement
Note
To listen to the sounds from a device connected to the AUDIO IN jacks, do not connect any device to the HDMI
IN, COAXIAL IN, and OPTICAL IN jacks, which are labeled with the same device name (such as SAT/CATV, TV,
VIDEO 1, and SA-CD/CD).
Tip
You can connect devices other than those indicated above to the AUDIO IN jacks (SAT/CATV, VIDEO 1, and SA-
CD/CD).
You can rename each input so that the name can be displayed on the display panel of the receiver. For details,
refer to "Changing the name for each input (Name)" in Help Guide.
Connecting another amplifier in Zone 2
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Audio cable (not supplied)
Note
Only audio signals from [USB], [Bluetooth] (only when [Bluetooth Mode] is set to [Receiver]), [Home Network],
[Music Service List], and [FM TUNER] and audio signals input from AUDIO IN jacks located on the rear panel of
the receiver are output to the Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN and HDMI IN jacks cannot be output to Zone 2.
If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or [Home
Network] are output to the Zone 2 speakers.
GB
34
Main zone
Audio signals
Zone 2
Speaker
Speaker
Amplifier/
Receiver
Hide quick links:
Advertisement
Table of Contents
