Table of Contents
Advertisement
5.1-channel speaker system with Bi-Amplifier connection
When the front speakers are Bi-wire speakers, which are equipped with separate terminals for
high-frequency sounds (tweeter) and low-frequency sounds (woofer), you can make the bi-
amplifier connection. Connect each pair of terminals for tweeter and woofer to the SPEAKERS
FRONT A terminals and SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)
terminals of this receiver. You can enjoy higher quality sound playback if you operate the tweeter
and woofer using separate amplifiers.
30˚
100˚ – 120˚
Surround speakers
Center speaker
Front speaker
Subwoofer
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid
receiver malfunction.
After you have made the connection, set [Surround Back Speaker Assign] in [Speaker Settings] to [BI-AMP].
GB
24
Hide quick links:
Advertisement
Table of Contents
