Siemens sitrans PROBE LU Instruction Manual page 69

P923 Distance Measurement
Displays the distance between the monitored surface and the transducer face.
Values (view only)
P924 Volume (or Flow) Measurement
The calculated vessel capacity in Maximum Volume (P051) or percent of Maximum
Volume (volume calculation must be enabled at P050).
Values (view only)
Related Parameters
P999 Master Reset
Note:
Following a Master Reset, complete reprogramming is required.
Resets all parameters to their factory settings, with the following exceptions:
• P000 and P069 are not reset.
• The learned TVT curve is not lost.
Use this feature after upgrading software:
1. Select P999.
2. Press CLEAR
3. Reset complete.
(Note: Reset takes several
seconds to complete.)
7ML19985HT01
Range
Range
- - - -
P051 Maximum Volume
P050 Vessel (or Channel) Shape
then ENTER
SITRANS Probe LU – INSTRUCTION MANUAL
–99999 to 99999
: –99999 to 99999
Display when volume calculation is not
enabled at P050 (P050 = 0)
to Clear All and initiate reset.
Page 63