Setting The Zero Offset - Siemens SINUMERIK 802D Training Manual

Section 4

4.1 Setting the zero offset

On a milling machine a value in all three geometry axis has to be set.
The offset is set using the scratch function in the control, to use scratch the
spindle should first be started in MDA.
T1 ; manual 3D-Dial indicator
M6
M30
The height of a slip guage can be put in the distance field.
SINUMERIK 802D sl Operating and Service Training Manual
Setting the zero offset
Example to determine the
Z zero offset:
Drive to the surface of the work-
piece until indication.
Page 7
Notes
C74
C74