Maintenance Intervals; Lubrication - Echo SRM-2100SB Operator's Manual

99944200540
Click HERE or go to http://www.echo-usa.com/products/maintenance-kit for
information on Maintenance Kits

Maintenance Intervals

Component/System
Drive Shaft
Gear Housing
Screws/Nuts/Bolts
IMPORTANT - Time intervals shown are maximum. Actual use and your
experience will determine the frequency of required maintenance.
(1) Apply lithium based grease.

Lubrication

Level 1.
Parts Required:
Gear Housing
1. Clean all loose debris from gear
case.
2. Remove plug (A) and check level
of grease.
3. Add grease if necessary. DO
NOT over-fill.
Drive Shaft (Lower)
1. Loosen screw (B) and remove
locating screw (C). Pull gear
case and shield from drive shaft
housing.
2. Pull flexible cable from the drive shaft housing, wipe clean and re-coat with
a thin coating [15 ml (1/2 oz.)] of grease.
3. Slide the flexible cable back in the drive housing. DO NOT get dirt on the
flex cable.
4. Install the gear housing and shield assembly.
X7532279109
© 7/2016 ECHO Inc.
Maintenance
Procedure
Grease
Grease
Inspect/
Tighten/
Replace
Lithium Base Grease.
B
MAINTENANCE
Skill
Level
1 Every 25 hours of use (1)
1 Every 50 hours of use (1)
1 Before Each Use
Interval
C
A
15