How To Remove Decoration Panel (Display Part); Peg Frame - Panasonic NC-TXF22 Service Manual

4.6 How to remove Decoration
panel (Display part)
Open (A point) with minus screwdriver of small
pin.

4.7 Peg frame

1. Remove body follow the instruction.
2. Remove bottom ring upside with minus
screwdriver or etc.
3. Remove 1 screw off.
4. Use minus screwdriver to pry between 2 ribs
of peg frame and body, and then push out
peg frame with thumb, then pull it off.
Bottom ring
Peg frame
Minus
screwdriver
- 10 -
NC-TXF22, NC-TXF30
A
KEEP WARM BOIL
FIG. 6
Tapping screw
(M4 x 12)
FIG. 9
FIG. 7