Panasonic EP1022-U1 Service Manual page 21

10.3. Removing the gear box
1. Perform removal of steps 1 to 11 of " 10.2. Removing the tapping shaft assembly ".
2. Remove one screw and the Capacitor.
3. Remove the transformer set screw, and remove the transformer and remove the base for transformer set screw R to T and
remove the base for transformer.
4. Remove the gear box screws, U to X.
5. After removing the screws, the massage clutch, up/down clutch and intermediate gear block can be removed.
*Take care so that the grease does not stick to the massage
clutch and up/down clutch pulleys. If grease sticks, remove it
with alcohol.
*The massage clutch and up/down clutch have similar shapes.
The lead wires are the same gray color, so please choose
based on connector color.
21
EP1022-U1