Table of Contents
Advertisement
CHAPTER 4 WIRELESS APPLICATIONS
Introduction
Wireless Local Area Networks (LANs) allow mobile computers to communicate wirelessly and send captured
data to a host device in real time. Before using the wearable terminal on a WLAN, the facility must be set up
with the required hardware to run the wireless LAN and the wearable terminal must be configured. Refer to the
documentation provided with the access points (APs) for instructions on setting up the hardware.
802.11d is enabled by default. When enabled, the AP must be configured the same in order to
NOTE
connect.
To configure the wearable terminal, a set of wireless applications provide the tools to configure and test the
wireless radio in the wearable terminal. Refer to the Wireless Fusion Enterprise Mobility Suite User Guide for
Version X1.01 for information on configuring wireless profiles. Go to
latest version of this guide. See Software Versions on page x to determine the Fusion version on the wearable
terminal.
Tap the Signal Strength icon to display the Wireless Launcher menu.
Signal Strength Icon
Wireless Launcher Menu
Figure 4-1
http://supportcentral.motorola.com
for the
Hide quick links:
Advertisement
Table of Contents
