Reduces Power Consumption; Customizing The Input Labels - Panasonic TH-50PH10UKA Operating Instructions Manual

Reduces power consumption

• POWER SAVE:
• STANDBY SAVE:
• POWER MANAGEMENT:
• AUTO POWER OFF:
1
2
3

Customizing the Input labels

This function can change the label of the Input signal to be displayed.
Select the input signal which you would like to change its label before customizing
the Input labels. (see page 15, 18)
Note:
While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and Slot 3, the Input label will
depend on each Optional Terminal Board.
INPUT LABELS for Slot 1, Slot 2, Slot 3 and Mini D-sub:
[Slot1 Input]
[Slot2 Input]
[Slot3 Input]
[PC (Mini D-sub) input] PC/COMPONENT/RGB/DVD/STB
When BNC Dual Video Terminal Board (TY-FB9BD) is used, an "A" or "B" is added at the end of each input label, depending
on the input selected (see below).
Addition sign
Selected Input
32
When this function is turned ON, luminous level of the Plasma Display is suppressed, so
power consumption is reduced.
When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 13-15), so standby power of the set is reduced.
The unit power supply is turned ON or OFF depending on whether or not there is a signal
during PC input mode.
This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub)
terminal)
Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to select
"POWER SAVE"
"STANDBY SAVE"
"POWER MANAGEMENT"
"AUTO POWER OFF".
Press to select "ON" or "OFF".
On Off
Press to exit from SET UP.
Press to select INPUT LABEL.
Press to change the INPUT LABEL.
INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1
INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2
INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3
"A"
Composite
Note:
"POWER MANAGEMENT" and "AUTO POWER OFF" are
effective during normal viewing (one picture screen) only.
"B"
S VIDEO
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
1/2
1/2