When using the predefined protocol function, open setting in the Ethernet configuration window is not available.
Do not select the "Set Open Setting in Ethernet Configuration Window" checkbox in "Built-in Ethernet Port Setting" tab.
For the protocol setting method, refer to the following.
GX Works2 Version 1 Operating Manual (Intelligent Function Module)
58
8.
Create a program for starting data communications.
In the case of Active open, create the program in which
SP.SOCOPEN instruction is used to establish a
connection. (
Page 86, Section 7.4.1)
To activate the predefined protocol, the SP.ECPRTCL
instruction is used. (
9.
Write the program to the CPU module.
[Online]
[Write to PLC]
10.
Execute the program written to the CPU module by
using the SP.ECPRTCL instruction.
Page 61, Section 6.4.1)