Setting Up The Keyboard Case; Getting Started - Logitech UNIVERSAL FOLIO Setup Manual

SETTING UP THE KEYBOARD CASE

Getting started

1
Pull the battery tab away
from the keyboard:
Check that the power button is set
to "on" and the LED is blinking.
2
Open the keyboard case,
insert the top corners of
your tablet into the top hooks
of the expandable holder:
If the tablet is too big, insert the left
corner into the holder first, push it up
a bit, then insert the right corner into
the holder.
3
Push the whole tablet up and
lock the bottom two corners
into the holder:
4 English
4
Move the keyboard case
into the typing position.
Push the hooks on the holder
into the lifting slots on
the keyboard:
The hooks must be inserted into
the lifting slots to allow lifting of
the whole case.