Fujitsu PRIMERGY RX1330 M3 Operating Manual page 24

Hide thumbs Also See for PRIMERGY RX1330 M3:
Table of Contents

Advertisement

Functional overview
Management LAN
(RJ45)
Onboard or integrated controllers
RAID Controller
SATA Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
Slots
PCI Express 3.0 x8
PCI Express 3.0 x4
(mech. x8)
Slot notes
24
1 x dedicated management LAN port for iRMC S4
(10/100/1000 Mbit/s); management LAN traffic can
be switched to shared onboard Gbit LAN port
Modular Host Bus Adapter with "Integrated RAID"
(IR). RAID levels 0 and 1 are supported for internal
HDD configurations.
Modular RAID 0/1 controller with "MegaRAID
functionality" (integrated MegaRAID).
RAID levels 0, 1, 10, 5 and 50 are supported for
internal HDD configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (MegaRAID).
RAID levels 0, 1, 10, 5, 50, 6 and 60 are supported
for internal HDD configurations.
A 6-port SATA controller is integrated on the system
board; up to four SATA HDDs can be connected to
the controller. The LSI Embedded MegaRAID
software (SATA Software RAID) supports RAID
levels 0, 1 and 10.
Integrated Remote Management Controller
(iRMC S4), 256 MB DDR3-800 SRAM for video,
IPMI 2.0 compatible
Infineon TCG V1.2 compliant (option)
Infineon TCG V2.0 compliant (option)
2 x low-profile length 175 mm; one slot may be
occupied by Modular RAID
1 x low-profile
Optional support of 1x full height PCIe Gen3 x8 card,
instead of 1x PCIe Gen3 x4 and 1x PCIe Gen3 x8.
Operating Manual
RX1330 M3

Advertisement

Table of Contents
loading

Table of Contents