Introduction; Ff 650 Gps Dimensions; Device Overview; Keys - Garmin FF 650 GPS Owner's Manual

Introduction

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.

FF 650 GPS Dimensions

176 mm (6.94 in.)
178 mm (7 in.)
190 mm (7.5 in.)
81.8 mm (3.25 in.)

Device Overview

Power key
Device keys
Introduction
WARNING

Keys

Hold to turn the device on or off.
Select to adjust the backlight, adjust the color mode,
configure colors, and enable and disable sonar.
MARK/WPT From a 2D chart or sonar page with the sonar paused,
select to mark your cursor position as a mark.
MOB
From a 2D chart with the cursor invisible and no menu
shown, select to mark your boat position as a mark.
From a 2D chart or sonar page, select MENU >
MARK/WPT to mark your boat position as a mark.
From any other page, select to mark your boat position
as a mark.
From a 2D chart or sonar page with the sonar paused,
hold to mark your cursor position as a waypoint.
From a 2D chart with the cursor invisible and no menu
shown, hold to mark your boat position as a waypoint.
From a 2D chart or sonar page, select MENU, and hold
MARK/WPT to mark your boat position as a waypoint.
From any other page, hold to mark your boat position as
a waypoint.
Hold to open the man overboard (MOB) option.
GOTO Select to go to a selected waypoint or location.
GAIN/ From a sonar screen, select to adjust the gain.
CLUTTER
From a sonar screen, hold to open the clutter menu.
RANGE/ From a sonar screen, select to adjust the sonar range.
ZOOM
From a sonar screen, hold to open the zoom menu.
Select to scroll, highlight options, and move the cursor.
Select to scroll, highlight options, and move the cursor.
Select to pause sonar.
Select to zoom in to a view.
Select to zoom out of a view.
BACK Select to return to the previous screen.
Hold to return to the home screen.
SELECT Select to select options and acknowledge messages.
MENU Select to open the options menu for each page.
PAGE Select to scroll through pages.
Contacting Garmin
Go to www.garmin.com.sg/support
information.

Selecting the Transducer Type

If you are not using the included transducer, you must set the
transducer type to enable the sonar to function optimally. If you
are using the included transducer, you do not need to complete
these steps.
1
Select Settings > My Vessel > Transducer Type.
2
Select the type of transducer you are using.

Zooming In and Out of the Waypoint Map

The zoom level is indicated by the scale number at the bottom of
the waypoint map. The bar under the scale number represents
that distance on the waypoint map.
• Select to zoom out.
• Select to zoom in.

Panning on the Waypoint Map

You can move the waypoint map to view an area other than your
present location.
Use the arrow keys to pan.
Product Support
®
for in-country support
1