Multi Channel Surround Receiver; Connect Your Computer - Philips FTR9955/12 User Manual

L
CENTRE
L
AUDIO OUT
R
2
1
Connect Peripheral Equipment
26
Headphone
&
Insert the plug into the headphone socket L behind the door at the front
side of the receiver. Press the centre of the door to open.
é
Press ¬ to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the menu select
SOUND
volume and balance and to select the audio source for your headphone
sound. See p. 15.
Note: When a TV channel or external source is blocked via the Childlock menu
(see p. 16), also the headphone is muted.
When Dual screen PIP is activated (see p. 18) (FTR 9964 only) :
- if the main screen displays a TV channel picture, you hear the sound from the
Dual screen/PIP picture through your headphone;
- if the main screen displays a picture from an external source, you hear the sound
from the main screen through your headphone.

Multi channel Surround receiver

&
Connect the audio cable to the multi channel Surround receiver and to
and
AUDIO OUT L R
é
If you want the loudspeakers of your monitor to act as centre speaker, also
connect an audiocable to the multi channel Surround receiver and to the
SURROUND SOUND CENTRE IN
"
Select
Centre mode On
The loudspeakers of the monitor will now only produce centre sound, the
loudspeakers connected to the audio receiver will produce Surround Sound.
The volume has to be controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is blocked via
the Child lock menu (see p. 16).

Connect your computer

See the separate supplied instruction manual with your monitor.
Headphone volume
at the back of your TV receiver box 1.
at the back of your TV receiver box 2.
in the Setup, General menu. See p. 9.
to adjust the headphone