Digital Surround Receiver; Record With Your Recorder - Philips 42-50-63PF9631D/37 Manual

Connect a Digital Surround receiver
o o o
AUDIO
DISPLAY SYNCHRONIZED DISPLAY
L R
SYNCHRONIZED
DIGITAL AUDIO OUT OUT
DIGITAL
AUDIO
OUT
POWER
FORMAT
MY CONTENT
GUIDE
FAV
MUTE
-
SOURCE SOURCE
INFO PIP A/CH
SOURCE SOURCE
<
Connect a MultiChannel Surround receiver to the
AUDIO OUT
Note: Due to legal requirements, it is possible that with
certain copy protected PCM audio qualities from a
peripheral equipment connected to the
Digital audio output signal is muted.

Record with your recorder

Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note:When recording analog programs, switching channel
numbers on your TV does not disturb recording !
Select connected equipment
Before operating your connected equipment you have to make
a selection in the Setup, Select your source menu, p. 22.
1. Press the AV
Setup menu (see p. 22) to select
, Side or TV, according to where you connected
HDMI 2
your devices.
2. Press the cursor up/down.
3. Press .
OK
connector at the bottom of the TV.
button repeatedly or select Source in the
AV1
DIGITAL
HDMI input, the
, , , ,
AV2 AV3 HDMI 1
49
EN