Table of Contents
Advertisement
1 Addendum
Enlarge teletext pages
The section "Enlarge teletext pages" in this
user manual instructs you to press OPTION
to enlarge teletext pages.
After updating the TV software (to version
64.67.3 or higher), OPTION can no longer be
used to enlarge teletext pages.
Use the following instructions in place of the
original instructions to enlarge teletext pages:
1
Press TELETEXT and select a teletext
page.
2
Press
(Picture format) to enlarge the
top part of the page.
3
(Picture format) again to view
Press
the enlarged lower part of the page.
4
Press
to scroll through the enlarged
page.
5
(Picture format) again to return
Press
to the normal page size.
Use dual screen teletext
The section "Use dual screen teletext" in this
user manual instructs you to press
screen to display normal teletext when dual
screen teletext is enabled.
After updating the TV software (to version
64.67.3 or higher),
longer be used to display normal teletext.
Use the following instructions in place of the
original instructions:
1
Dual screen on your remote
Press
control to enable dual screen teletext.
2
Press
Dual screen again to exit
teletext.
Dual
Dual screen can no
Advertisement
Table of Contents
Related Manuals for Philips 37PFL5603D/10
Summary of Contents for Philips 37PFL5603D/10
- Page 1 1 Addendum Enlarge teletext pages The section “Enlarge teletext pages” in this user manual instructs you to press OPTION to enlarge teletext pages. After updating the TV software (to version 64.67.3 or higher), OPTION can no longer be used to enlarge teletext pages. Use the following instructions in place of the original instructions to enlarge teletext pages: Press TELETEXT and select a teletext...
- Page 2 Register your product and get support at www.philips.com/welcome USER MANUAL...
- Page 3 Sverige Suisse/Schweiz/ Svizzera Türkiye United Kingdom Україна This information is correct at the time of press. For updated contact information, refer to www.philips.com/flavors. www.philips.com/support 0810 000205 €0.07 pro Minute 078250145 €0.06 Per minuut/Par minute Местен разговор +3592 489 99 96...
-
Page 4: Table Of Contents
Table of contents 1 Important � � � � � � � � � � � � � � � � � � � � � 3 1.1 Safety ......3 1.2 Screen care . - Page 5 No components are user- serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centres and official repair shops. Failure to do so shall void any warranty, stated or implied.
-
Page 6: Important
Important Congratulations on your purchase and welcome to Philips! Read this user manual before you start to use this product. Pay close attention to this section and follow the safety and screen care instructions. The product warranty does not apply if damage is caused by failing to follow these instructions. -
Page 7: Screen Care
Unplug the mains cord from the power connector at the back of the TV. Always pull the mains cord by the plug. Do not pull the mains cord. • Permanent hearing loss can occur if you use earphones or headphones at high volumes. Though high volume may sound normal over time, it can damage your hearing. -
Page 8: Your Tv
Your TV This section gives you an overview of commonly-used TV controls and functions. 2�1 TV overview Side controls and indicators POWER PROGRAM +/- MENU VOLUME +/- Power indicator/Remote control sensor Side connectors VOLUME Use the TV side connectors to connect to mobile devices such as a camera or high- definition game console. - Page 9 Remote control SOURCE TELETEXT SUBTITLE DEMO GUIDE BACK EXIT MENU BROWSE MHEG CANCEL EN-6 STANDBY SOURCE TELETEXT COLOUR KEYS From left: Red, green, yellow, blue NAVIGATION KEYS Up Î, Down ï, Left Í, Right Æ, OK MENU PROGRAM +/- VOLUME +/- INFO For advanced information about the remote control, see Section 5.1 Remote control overview.
-
Page 10: Get Started
Get started This section helps you position and install the TV and supplements the information provided in the Quick Start Guide. Note Refer to the Quick Start Guide for stand mounting instructions. 3�1 Position the TV In addition to reading and understanding the safety instructions in Section 1.1, consider the following before positioning your TV: • The ideal viewing distance for watching TV... - Page 11 Step 2 Remove the TV stand Note These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Secure the VESA-compatible wall bracket to the TV. TV stands may differ in shape on some TV models.
-
Page 12: Connect The Antenna Cable
3�3 Connect the antenna cable Locate the TV ANTENNA connector at the back of the TV. Connect one end of an antenna cable (not supplied) to the TV ANTENNA connector. Use an adaptor if the antenna cable does not fit. Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tightly secured at both ends. -
Page 13: Insert The Remote Control Batteries
3�5 Insert the remote control batteries Slide the battery cover off the back of the remote control. Insert the two supplied batteries (Size AAA, Type LR03). Be sure the + and - ends of the batteries line up with the markings inside the case. -
Page 14: Use Your Tv
Use your TV This section helps you perform basic TV operations. Instructions on advanced TV opera- tions are provided in Section 5 Use more of your 4�1 Switch your TV on/off or to standby 4�1�1 Switch on your TV • If the power indicator (1) is off, press POWER on the side of the TV. -
Page 15: Watch Tv
4�2 Watch TV 4�2�1 Switch channels • Press a number (1 to 999) or press on your remote control. • Press PROGRAM +/- on the side controls of the TV. • Press on the remote control to return to the previously-viewed TV channel. 4�2�2 Switch channels (digital receiver) Switch on the digital receiver. -
Page 16: Use Teletext
4�4 Use teletext Most TV channels broadcast information via teletext. Press TELETEXT on the remote control. The main index page appears. To select a page with the remote control: • Enter the page number with the number keys. • Press P +/- or Î/ï to view the next or the previous page. -
Page 17: Use More Of Your Tv
Use more of your TV This section helps you perform advanced TV operations, including how to: • Use the TV menus ( Section 5.2) • Adjust picture and sound settings ( 5.3) • Change to Shop or Home mode ( 5.4) •... - Page 18 STANDBY Switches the TV on from standby or back to standby. SOURCE Selects connected devices. PICTURE FORMAT Selects a picture format. SUBTITLE Activates or deactivates subtitles. COLOUR KEYS Selects tasks or teletext pages. INFO Displays programme information, if available. Accesses the All channels menu or activates a setting.
-
Page 19: Use Tv Menus
5�2 Use TV menus On-screen menus help you install your TV, adjust picture and sound settings and access other features. This section describes how to navigate the menus. 5�2�1 Access the main menu Press MENU on the remote control to display the main menu. -
Page 20: Picture Format
Press ï to select Picture. TV settings Picture Settings assistant Contrast Reset smart settings Brightness Colour Picture Sound Sharpness Tint Press Æ to enter the Picture settings. Picture Contrast Contrast Brightness Colour Sharpness Tint Press ï to select Brightness. Picture Brightness Contrast Brightness... -
Page 21: Adjust Picture And Sound Settings
Quick access Audio language Subtitle language Subtitle Picture format Equalizer Clock Press OPTION and press Î or ï to select Clock again. Press OK to hide the clock. 5�3 Adjust picture and sound settings This section describes how to adjust picture and sound settings. -
Page 22: Active Control
follow the on-screen instructions to change the value of: - R-WP (Red White Point) - G-WP (Green White Point) - B-WP (Blue White Point) - R-BL (Red Black Level) - G-BL (Green Black Level) • Dynamic contrast Enhances the contrast in the picture as the image on the screen changes. - Page 23 5�3�4 Change picture format Change the picture format to suit your content. Press PICTURE FORMAT on your remote control. Alternatively, press MENU and select TV menu > TV settings > Picture > Picture format. Press Î or ï to select one of the following picture formats: •...
-
Page 24: Surround Mode
5�3�5 Adjust sound settings This section describes how to adjust sound settings. Press MENU on the remote control and select TV menu > TV settings > Sound. Press Æ to enter the list. TV settings Sound Settings assistant Equalizer Volume Reset smart settings Picture Balance... -
Page 25: Change To Shop Or Home Mode
5�4 Change to Shop or Home mode Press MENU on the remote control and select TV menu > Installation > Preferences > Location. Press Æ to enter the Location menu. Î or ï to select the TV mode: • Shop Sets smart settings to Vivid, ideal for a shop environment. - Page 26 5�5�5 Enlarge teletext pages For more comfortable reading, you can enlarge the teletext page. Press TELETEXT on the remote control and select a teletext page. Press OPTION on the remote control to enlarge the top part of the page. Press OPTION again to view the enlarged lower part of the page.
-
Page 27: Create Favorite Lists
Press MENU on the remote control and select TV menu > Installation > Preferences > Teletext 2�5. Press Æ to enter the list. Select On or Off. Press OK to change the option. 5�6 Create favorite lists Use the All channels list or setup a favourite list of your own with preferred TV channels and radio stations. -
Page 28: Use The Electronic Programme Guide
5�7 Use the Electronic Programme Guide EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes by time, title or genre. There are two types of EPG, ‘Now and Next’ and ‘7 or 8 day’... -
Page 29: Use Timers And Child Lock
Press GUIDE on the remote control. Press MENU on the remote control. The Programme guide menu appears. Programme guide What's on What's on 12:30 South Today Search by genre 11:50 Working Lunch 11:55 Melrose Place Scheduled remind... Preferred EPG ch... 13:00 In aller Freund Acquire EPG data Press... -
Page 30: Use Subtitles
To enter the Child lock menu Press MENU on the remote control and select TV menu > Features > Child lock and press Æ to enter your code. Enter your code with the number keys. To lock or unlock all channels and connected devices In the Child Lock menu, select Lock or... -
Page 31: View PHotos And Listen To Music
TV menu Features TV settings Subtitle Features Subtitle language Installation Sleeptimer Software update Child lock Set/Change code On timer Common interface Demo Press Î or ï to select On to display subtitles always or On during mute to display subtitles only when the sound is muted with the key on the remote control. - Page 32 5�10�3 View your photos After connecting your USB storage device to the TV, press Æ to enter the Multimedia menu. Picture is highlighted. Picture Picture Afrika_2001 Music Paris_2006 My_car.jpg Jean.jpg Mary.jpg Press Æ to enter the Picture folder. Press Î or ï to select a picture or a picture album on the USB device.
-
Page 33: Listen To DIgital RadIo Channels
Music folder. Press Î or ï to select a song or a music album. Press OK to play the selected song or album. Music settings • No details/More details Displays the file name. • Repeat one/all Repeat a song or an album. •... - Page 34 5�12�4 Update software (analogue broadcasts) Note Before performing this procedure be sure • Set aside some time to complete the entire update. • Have available a USB storage device with at least 64MB of storage space. • Have access to a computer with a USB port and internet access.
-
Page 35: Install Channels
Install channels The first time you setup your TV, you will be prompted to select an appropriate menu language and to perform automatic installation of all TV and digital radio channels (if available). This chapter provides instructions on how to reinstall channels as well as other useful channel installation features. -
Page 36: Manually Install Channels
Press OK to confirm. Press Î or ï to select your country. Press Next. Step 3 Select Antenna or Cable (DVB-C only) Note This option appears only if your country supports DVB-C (Digital Video Broadcasting-Cable). Skip to Step 4 Install channels if DVB-C is not available in your country. -
Page 37: Rename Channels
Step 2 Search and store new TV channels Press MENU on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation > Search. Press Æ to enter the Search menu. Press the red key and use the number keys on the remote control to manually enter the three digit frequency. -
Page 38: Manually Update The Channel List
Press Æ to enter the Rearrange list. Press Î or ï to select the channel you want to rearrange. Press the yellow key to move the channel up the list. or press the blue key to move the channel down the list. Press MENU to exit. -
Page 39: Reset Tv To Factory Settings
6�9 Reset TV to factory settings Resetting your TV to factory settings restores default picture and sound settings. Channel installation settings remain the same. Press MENU on the remote control and select TV menu > Installation > Factory settings. Press Æ... -
Page 40: Connect Devices
Connect devices 7�1 Connection overview Back connectors EXT 1 First SCART connector for DVD players, VCRs, digital receivers, game consoles and other SCART devices. Supports Audio L/R, CVBS in/out, RGB. EXT 2 Second SCART connector. Supports Audio L/R, CVBS in/out, RGB. EXT 3 Component video (Y Pb Pr) and Audio L/R input connectors for DVD players,... -
Page 41: Select Connection Quality
TV and HDMI devices. You must use HDMI to experience full high-definition video. You must also use HDMI cables to enable Philips EasyLink as described in Section 7.5 Use Philips EasyLink. If your PC only has a DVI connector, use a DVI-HDMI adaptor to connect your device to a HDMI connector at the back of the TV. - Page 42 7�2�2 Component (Y Pb Pr) - Higher quality Component (Y Pb Pr) video provides better picture quality than S-Video or composite video connections. Though component video supports high-definition signals, picture quality is lower than HDMI and is analogue. When connecting a component video cable, match the cable colours to the EXT 3 connectors on the back of the TV.
-
Page 43: Connect Devices
7�3 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide. Caution Disconnect the mains cord before connecting devices. Note Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. - Page 44 7�3�3 Satellite receiver To receive analogue channels via antenna and digital channels via a satellite receiver, connect an antenna cable and SCART cable as illustrated: Satellite receiver 7�3�4 HD digital receiver To receive analogue channels via antenna and digital channels via a HD digital receiver, connect two antenna cables and HDMI cable as illustrated: HDM I...
- Page 45 7�3�5 Combined DVD recorder and digital receiver To receive analogue channels via antenna and record programs on a combined DVD recorder and digital receiver, connect two antenna cables and one SCART cable as illustrated: 7�3�6 Separate DVD recorder and receiver To receive analogue channels via antenna and record programmes on a separate DVD recorder and receiver, connect three antenna...
- Page 46 7�3�7 DVD recorder and home theatre system To receive analogue channels via antenna, output sound to a home theatre system and record programmes on a DVD recorder, connect two antenna cables, one SCART cable and two digital audio cables as illustrated: Note If using a home theatre or other audio system, the best synchronisation between...
-
Page 47: Setup Devices
A permanent game console or camcorder can be connected to a HDMI connector or EXT 3 (component) connectors at the back of the TV. 7�3�9 Personal Computer Before connecting the PC: • Set the PC monitor refresh rate to 60Hz. See Section 8 Technical specifications for a list of computer resolutions. -
Page 48: Use Philips Easylink
ï or Î to select the connector used by the decoder. Press MENU to exit. 7�5 Use Philips EasyLink Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected to your TV via HDMI and assigned as described in Section 7.4.1... - Page 49 Push the CAM in as far as it will go. Turn on the TV and wait for the CAM to be activated. This may take several minutes. EN-46 Note Do not remove the CAM from the slot. Removing the CAM will deactivate the digital services.
-
Page 50: Technical Specifications
Technical specifications Supported display resolutions • Computer formats Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1920 x 1080i 60Hz 1920 x 1080p 60Hz • Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz... -
Page 51: Troubleshooting
Troubleshooting This section describes commonly-encountered issues and accompanying solutions. 9�1 General TV issues The TV does not switch on: • Unplug the mains cord, wait for one minute and plug in the mains again. • Verify that the mains cord is properly connected and that the mains are powered. -
Page 52: Sound Issues
• Verify if the correct TV system is selected for your region.See Section 6.2 Manually install channels. • If reception on only one channel is poor, try to fine tune this channel. See Section 6.2.1 Fine tune channels. You receive poor picture quality from connected devices: •... -
Page 53: Usb Connection Issues
9�6 USB connection issues The TV does not display the USB device content: • Set your device to ‘Mass Storage Class’ compliant, as described in your device documentation. • Your USB device may not be compatible with the TV. • Not all audio and picture files are supported. -
Page 54: 10 Index
10 Index Active Control 19 All channels list 24 Analogue Channel installation 33 Fine tune channels 34 Antenna Connect 9 Assign Devices 44 Audio language 21 Automatic Channel installation 32 Surround 21 Volume leveling 21 Back connectors 5 Balance Sound 21 Brightness 18 Care Environment 4... - Page 55 Assign channel decoder 45 Assign to connectors 44 Side connectors 38 Contrast 18 Country Selection 32 Custom tint 18 Decoder 45 Delta volume 21 Demo 35 Devices Watch 12 Digital Radio 30 Services 45 Teletext 23 Dual I/II 21 Dual screen teletext 22 Dynamic contrast 19 Electronic Programme Guide Use 25...
- Page 56 Colour 18 Colour enhancement 19 Contrast 18 Custom tint 18 Dynamic contrast 19 Hue 18 Light sensor 19 Noise reduction 19 Sharpness 18 Tint 18 Change format 20 Use Settings assistant 18 Use smart settings Current 19 Movie 19 Standard 19 Vivid 19 Position TV 7 Power...
- Page 57 Digital TV 28 Language 28 Surround sound Auto 21 Mode 21 S-Video 39 Switch TV Off 11 On 10, 11 On from standby 11 To standby 11 System selection 33 Technical specifications 47 Teletext Advanced use Cycle subpages 23 Digital teletext 23 Dual screen 22 Enlarge 23 Language 23...
- Page 58 Watch Channels 12 Devices 12 Uninstall channels 34 USB device Connect 28 Disconnect 28 VESA wall bracket 7 Video formats 47 Volume Adjust 12, 21 Automatic leveling 21 Delta 21 Headphone 21 Wall mount TV 7 Y Pb Pr 39 EN-55...
- Page 60 © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 3139 125 39504...