Side Connections; Multi Channel Surround Receiver; Cinema Link Surround Receiver; To Select Connected Equipment - Philips FTR 9965/12 Instruction Manual

Philips flat tv instruction manual ftr 9965/12
Hide thumbs Also See for FTR 9965/12:
Table of Contents

Advertisement

Side connections

1
2
3

Multi channel Surround receiver

CENTRE
L
AUDIO OUT
R
2
1

Cinema Link surround receiver

See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Connect your computer
See the separate supplied instruction manual with your monitor.

To select connected equipment

Press the v key on the remote control repeatedly to select
or
according to where you connected your equipment at the back or the front side of your receiver.
VGA
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
20
Camera or Camcorder
&
Connect your camera or camcorder as shown.
é
Connect to
VIDEO
equipment. For stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-video input 3 and
audio inputs 1.
Do not connect cable 2 and 3 at the same time. This may cause
picture distortion !
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the internal
é
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
&
Connect the audio cable to the multi channel Surround receiver
and to
AUDIO OUT L
box 1.
é
If you want the loudspeakers of your monitor to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
at the back of your TV receiver box 2.
IN
"
Select
Centre Input On
The loudspeakers of the monitor will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 13).
2 and
1 for mono
AUDIO L
Headphone volume
and
at the back of your TV receiver
R
SURROUND SOUND CENTRE
in the Source menu. See p. 9.
,
,
,
EXT1
EXT2
EXT3
1.
AUDIO R
to adjust the
,
,
EXT4
EXT5
FRONT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents