Connect Extra Subwoofer; Side Connections; To Select Connected Devices - Philips Flat TV Manual

Connect extra subwoofer

MONITOR
OUT AUDIO
RECEIVER
R CENTRE R
SUBW.
VIDEO L L
SUBWOOFER

Side connections

2
1
3

To select connected devices

7 8 9
0 -
AV+
ACTIVE
SAP CONTROL CLOCK
Ambilight
ON/OFF MODE
AV3
R
HDMI
L
& Keep the
repeatedly or select
select
to where you connected your devices.
é Press the cursor up/down.
" Press
To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz).
& Connect the audio cable of the external subwoofer to
the
SUBWOOFER
é
Select Subwoofer
" Adjust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.
'
Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.
Camera, Camcorder, Game
& Connect your camera, camcorder or game as shown.
é
Connect to
VIDEO
equipment. For stereo equipment also connect
3.
AUDIO R
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
1 and inputs 3.
AUDIO
Do not connect cable 1 and 2 at the same time. This
may cause picture distortion !
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the
é
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select
the headphone volume.
button pressed and then press this button
AV+
Source
, ,
AV1 AV2 HDMI (AV3)
.
OK
socket at the bottom of your TV.
in the Settings, General menu, p. 8.
2 and 3 for mono
AUDIO L
S-VIDEO
Headphone volume
in the Settings menu (see p. 11) to
, or
Side TV channels
input
to adjust
, according
23