Connect Accessory Devices; Recorder (Vcr-Dvd+Rw); Recorder And Other A/V Devices - Philips Flat TV Manual

Connect Accessory Devices

There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
can handle YPbPr,Y/C and CVBS;
AV1
R
ANT IN
75
L
Recorder ( -
VCR DVD
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 20" from the screen.
AV2
R
Pr/R Y/G V
ANT IN
75
L CVBS S-VIDEO
Pb/B H
3
OUT
OUT IN
RECORDER

Recorder and other A/V devices

AV2
R S-VIDEO
Pr/R Y/G V
ANT IN
L CVBS S-VIDEO
75 Pb/B H
5 6
4
OUT IN
RECORDER
The connector can be used for a daisy chaining or to record programs from your TV
MONITOR OUT
6. Only when a recorder is connected to
TV. See Record with your recorder, p. 24.
YPbPr (RGB), CVBS and Y/C;
AV2
AV2 AV1
Pr/R Y/G V S-VIDEO R Pr
Pb/B CVBS H S-VIDEO L Pb
+ )
RW
&
é
"
CABLE
&
MONITOR
é
OUT
AV1
R Y R
Pr
"
L VIDEO L
Pb
'
CABLE
3
1
2
OUT IN
MONITOR OUT
HDMI (AV3)
MONITOR
OUT AUDIO
RECEIVER AV3
Y R CENTRE R R
VIDEO L SUBW. L L
Connect the RF Antenna or Cable TV cable (eventually
via an optional two-way signal splitter and/or Cable TV
converter box) 1 to the
recorder.
Connect another RF cable 2 from the output
your recorder to the TV's input 75 ø x jack.
Better playback quality can be obtained if you also
connect the Video, Audio Left and Right (only for stereo
devices) AV cables 3 to the
input jacks of .
AV2
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
with the input instead of connecting the
S-VIDEO
recorder to the
CVBS
S-Video does not provide audio, so audio cables must
still be connected to provide sound.
Connect the RF antenna cable 1 of the
of your other AV device.
Connect the RF output of the AV device to the RF input
of the recorder 2.
Connect another RF cable 4 from the output
your recorder to the TV's input 75 Ohm x jack.
To obtain better quality, also connect the Video or
S-Video,Audio left and Audio right cables of both devices
to ( or
AV1 Y S-VIDEO
( or ,
CVBS S-VIDEO
Notes:
- In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal
loudspeakers.
- When using the
S-VIDEO
device to the
AV2 CVBS
it is possible to record a program from your
; : CVBS and Y/C.
Side
HDMI
socket of your
RF IN
,
CVBS AUDIO L
jack of .
AV2
RF IN
,) 3 and to
, and
AUDIO L R
) 5.
and
AUDIO L R
connector do not connect any
or input.
AV1 Y
of
OUT
and
R
socket
of
OUT
AV2
19