Connect Extra Subwoofer; Side Connections; To Select Connected Devices - Philips 50PF9956/37 Owner's Manual

Connect extra subwoofer
UBWOOFER
To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz),
_]p Connect the audio cable of the external subwoofer to
the SUBWOOFER socket at the bottom of yourTV.
Select Subwoofer in the Settings, General menu, p, 8.
O Adiust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.
O Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofen
See also the instruction manual of the external
subwoofen
Side connections
Camera, Camcorder or Game
O Connect your" camera, camcorder or game as shown,
Connect to VIDEO (_) and AUDIO L _) for" mono
equipment. For stereo equipment also connect
AUDIO R (_),
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-VIDEO input
(_) and AUDIO inputs (_).
Do not connect cable (_) and (_ at the same time. This
may cause picture distortion /
Headphone
Insert the plug into the headphone socket ,_ as shown.
Press 1_ on the remote control to switch off the
internal loudspeakers of the TV.
77"_e h eadphone impedance must be between 8 and 4000
Ohm, The headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume
to adjust
the headphone volume.
To select connected devices
@,C ()
_[_ Press the AV+ button
repeatedly or select
Source in the
Settings menu (see p. 9) to select AVI, AV2, AV3 (HDMI), Side
or TV channels, according to where you connected your
devices.
Press the cursor up/down,
Press OK.
Remark: Most equipment (decoder; recorder) carries out the switching
itself This is however never the case with a computer connected to
the HDMI input.
20