If You Have a Flat Tire
2.
Align the index line ( ) of the front
axle shaft with the recessed surface ( )
of the fork leg.
LEFT FRONT
(5) index line
3.
Tighten the axle pinch bolts on the left
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4.
Tighten the front axle bolt to the
specified torque:
44 lbf·ft (59 N·m , 6.0 kgf·m)
162
Taking Care of the Unexpected
5
6
(6) recessed surface
5.
Operate the front brake and pump the
fork several times. Check for free
wheel rotation after the brake is
released. Recheck the wheel if the brake
drags or the wheel does not rotate freely.
6.
If the clearances between each surface
(5)
of the brake disc and the brake bracket
( ) (not the brake pads) are
7
symmetrical, follow next step.
If the clearances are not symmetrical,
(6)
loosen the left axle pinch bolts and pull
the left fork outward or push inward to
adjust the clearance. Then follow the next
step.