Honda VT750C2B Owner's Manual page 125

Brakes
Adjustment
1. Adjust by turning the rear brake
adjusting nut ( ) a half-turn at a time. 4
Make sure the cut-out on the adjusting
nut is seated on the brake arm pin ( ).
2. Apply the brake, release it, and then
spin the wheel and check that it rotates
freely. Repeat this procedure several
times.
3. Check the freeplay. If you can't adjust
the freeplay properly, see your dealer.
118
Servicing Your Honda
RIGHT REAR
5
(4) rear brake adjusting nut
(5) brake arm pin
( ) increase freeplay ＋
( ) decrease freeplay −
(4)
( ( − − ) )
( ( ＋ ＋ ) )
(5)