Hach SL1000 Basic User Manual page 12

8. The measurement values are shown on the display.
Note: When an error shows, push Details for more information.
Figure 7 Chemkey sample measurement
Connect a probe
Do not discard the probe connector port caps. Make sure that the probe connector port caps are installed when
no probe is connected.
Make sure that the display shows the current time and date and then plug the probe into the meter.
Refer to Figure 8.
Note: The time stamp for a probe is set when the probe is first connected to the meter. This time stamp makes it
possible to record the probe history and record the time when measurements are made.
12 English
N O T I C E