Connecting To Cellular Networks; Using Bluetooth Wireless Devices - HP ELITE X3 User Manual

3. Tap Network & wireless.
4. Tap Wi-Fi.
5. Make sure Wi-Fi networking is set to On, and then connect to one of the available networks.
If the WLAN is a security-enabled WLAN, you are prompted to enter a password. Enter the password, and
then tap Done to complete the connection.
NOTE:
NOTE:
screen instructions to complete the connection.
After the connection is made, swipe down from the top of the screen, and then view
and status of the connection.
NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router
manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.

Connecting to cellular networks

Your device supports a nano SIM card for connecting to cellular and data networks. Select products also
support a second nano SIM card, which allows your device to have two different phone numbers. See
Installing nano SIM cards on page 10
To access cellular and SIM settings:
1.
Swipe down from the top of the screen, and then tap
2. Tap Networks & wireless, and then tap Cellular & SIM.
3. Follow the on-screen instructions.
NOTE: For additional information, tap Learn more.

Using Bluetooth wireless devices

A Bluetooth device provides short-range wireless communications that replace the physical cable connections
that traditionally link electronic devices such as the following:
Computers (desktop, notebook)
●
Phones (cellular, cordless, smartphone)
●
Imaging devices (printer, camera)
●
Audio devices (headset, speakers)
●
Mouse
●
External keyboard
●
Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices.
20 Chapter 4 Network connections
If no WLANs are listed, you may be out of range of a wireless router or access point.
If you do not see the WLAN you want to connect to, tap Manage, tap +, and then follow the on-
for SIM card installation steps.
All settings.
to verify the name