Using The Optional Lap Dock; Connecting To Ac Power - HP ELITE X3 User Manual

Using the optional lap dock

NOTE: For information about the features and requirements of the lap dock, refer to the documentation
provided with the dock.

Connecting to AC power

WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin
outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
To ensure the correct performance of all lap dock features, connect the lap dock to an AC power source using
the lap dock power cord.
1. Connect the power cord and AC adapter to an AC outlet (1).
2. Connect the other end of the power cord and AC adapter to either USB Type-C power connector and
Super Speed port on the right side of the lap dock (2).
14 Chapter 3 Expanding the display
To reduce the risk of electric shock or damage to the equipment: