LiteOn SK-7260 User Manual page 8

communication between them.
3.3.2 Operation
Battery Installation
Installs two AA batteries to transmitter and connected the receiver with PC
system, it's ready for connection procedure.
Connection (ID Pairing) procedure
Procedure by steps
Step-1:Pressing channel button on the transmitter one time first ,
Step-2: Right away to press the channel button on the receiver at second and they
Step-3: Then go to the normal operate.
Note: preset in the production line as default setting before delivery
ID change :
Same as the the procedure of "connection procedure".
Channel and ID numbers
Channel: two channels including CH1 for keyboard(27.145mHZ) and CH2
ID: There has a randomly 256 ID from for selection.
Note: The ID indication is to prevent from interfering each other.
SK-7260 RF WIRELESS KEYBOARD
Should be in connection between,
For mouse (27.045mHz)
Page No: 6 of 6