Specifications - MTX TX81000D Owner's Manual

Thank you for purchasing an MTX Audio High-End TX amplifier. Proper installation matched with MTX speakers and subwoofers provide superi-
or sound and performance for endless hours of waking the neighbors. Congrats and enjoy the ultimate audio experience with MTX !

Specifications :

TX81000D Specifications :
• Mono block class-D amplifier
• CEA2006 certified Power Output :
- 1x 1000 Watts RMS @ 2Ω and THD+N ≤1%
- 1x 600 Watts RMS @ 4Ω and THD+N ≤1%
• Crossover :
- Low pass 24dB/oct variable from 40Hz to 150Hz
- Subsonic filter 24dB/oct at 30Hz
• Signal-to-Noise Ratio (1 Watt) : > 75dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,1%
• Frequency Response (±0,5dB) : 10Hz-150Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• EBC remote control
• Bridged mode with gain management
• Thermoregulated fan connector for an external fan(s)
• Dimensions : 366mm x 133mm x 54mm
Settings, Power and Speaker connections :
TX81000D TX6500D
Ch.1
Gain
6V - 0,2V
High Level
Inputs
+12V GND
Ch.2
Fan
GND REM 12V
Thank You !
TX6500D Specifications :
• Mono block class-D amplifier
• CEA2006 certified Power Output :
- 1x 500 Watts RMS @ 2Ω and THD+N ≤1%
- 1x 300 Watts RMS @ 4Ω and THD+N ≤1%
• Crossover :
- Low pass 24dB/oct variable from 40Hz to 150Hz
- Subsonic filter 24dB/oct at 30Hz
• Signal-to-Noise Ratio (1 Watt) : > 75dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,1%
• Frequency Response (±0,5dB) : 10Hz-150Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• EBC remote control
• Bridged mode with gain management
• Thermoregulated fan connector for an external fan(s)
• Dimensions : 266mm x 133mm x 54mm
Subsonic Low Pass
EBC
Remote
Off On
40Hz - 150Hz
Bridge Mode
Data
Link
Master Slave
Sub
Outputs
Top View
TX480D Specifications :
• 4-Channel Class-D wide range amplifier
• CEA2006 certified Power Output :
- 4x 140 Watts RMS @ 2Ω and THD+N ≤1%
- 4x 80 Watts RMS @ 4Ω and THD+N ≤1%
- 2x 280 Watts RMS bridged at 4Ω and THD+N ≤1%
• Crossover :
- High pass 12dB/oct variable from 40Hz to 400Hz
- Low pass 12dB/oct variable from 40Hz to 400Hz
• Signal-to-Noise Ratio (1 Watt) : > 85dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,05%
• Frequency Response (±1dB) : 10Hz-40000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• Thermoregulated fan connector for an external fan
• Dimensions : 216mm x 133mm x 54mm
TX480D
Ch.1
High Level
Ch.3 Ch.4
Inputs
GND REM 12V
Ch.2
Ch.1 Ch.2
Gain X-over Frequency
HP-OFF-LP
6V - 0,2V 40Hz - 400Hz
Ch.3 Ch.4
HP-OFF-LP
+12V GND
6V - 0,2V 40Hz - 400Hz
Ch.1 Ch.2 Ch.3 Ch.4
Bridge
Bridge
Fan
Ch.1
Ch.2
Ch.3
Ch.4