Adding Priority Mark(S) During Playback - Sony ICD-S7 Operating Instructions Manual

Adding Priority Mark(s) during Playback

1
Press A-B
button for more than 1 second
during playback of the message
you want to mark.
"★" and "PRIORITY" will flash on
the display window while the first
and last 5 seconds of the message is
played back 10 times.
2
Press A-B
repeatedly to select the number
of priority mark(s) (★).
3
Press the jog lever (x•B) to fix
the setting.
The setting is finished and the
messages will be renumbered.
Messages with priority mark(s)
Messages are sorted in order of the
number of priority mark(s) (★) in a
folder. Messages without a priority mark
are moved behind the messages with
priority mark(s).
1 Tip
If there are over 2 messages with the same
number of priority marks in a folder, these
messages are sorted by the recorded date
and time (The oldest one comes first).
Note
You can also add priority mark(s) using the
supplied "Digital Voice Editor" software.
But messages are not sorted in order of the
number of the priority marks unless you
sorted by the number of priority marks
using the software.
(repeat)/★ (priority)
(repeat)/★ (priority)
e.g. When there are 3
messages in a folder
Message 1
Message 2
Message 3
43
GB