Sony ICD-S7 Operating Instructions Manual page 35

1
Press ERASE while playing back the message you want to
erase or press ERASE for more than 1 second during stop
mode.
The message number and "ERASE"
will flash while the first and last 5
seconds of the message are played
back 10 times.
2
Press ERASE while the message is being played back and
"ERASE" is flashing.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
To cancel erasing
Press xSTOP before step 2.
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message by adding an index (see page 38) and then follow
the steps on this page to erase the message.
Continued
35
GB