Sony ICD-S7 Operating Instructions Manual page 19

Notes
• While an external speaker or a connecting cable is connected to the EAR/MIC
jack, you can hear beeps or playback sounds from the built-in speaker.
• When connecting an earphone or headphones (not supplied) during playback,
make sure to plug it securely. If you plug it loosely, you may hear sounds
from the built-in speaker. If this occurs, disconnect and then connect an
earphone or headphones again.
• With some types of headphones, sound may come from both the built-in
speaker and headphones. If this occurs, use the supplied earphone or the
headphones recommended for the IC recorder.
Other operations
To
stop at the beginning of
the current message
stop at the current position
(Playback Pause function)
go back to the beginning
of the current message*
go back to previous
messages
skip to the next message*
skip to the succeeding messages Press the jog lever up (>) repeatedly.
* If you have set a bookmark on the message, the unit stops at the bookmark.
** These operations are for when EASY-S is set to OFF. For operations when
EASY-S is set to ON, see page 54.
Playing back a message rapidly or slowly — DPC (Digital
Pitch Control)
When you adjust the playback speed with the DPC in the menu (page 28),
you can play back a message rapidly or slowing by sliding the DPC switch
to ON. When you set the playback speed faster or slower of the normal
speed, "FAST" or "SLOW" appears. You can change the setting during
playback.
Do this
Press xSTOP.
Press the jog lever (x•B).
To resume playback from that point,
press the jog lever (x•B) again.
Press the jog lever down (.)
once.**
Press the jog lever down (.)
repeatedly. (During stop mode, keep the
jog lever pressed to go back the
messages continuously.)
Press the jog lever up (>) once.**
(During stop mode, keep the jog lever
pressed to skip the messages
continuously.)
Continued
19
GB