1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case.
2. Insert a pin or clip in the hole of a drive to open the tray.
Insert a pin or clip in the hole of drive to open the a tray
1-2 WORK WHEN OPTICAL DEVICE ARE REPLACE
Note : Please do the following work when replace the Optical Unit (BU)
Details refer to 1.4-8 BU Data Decode Jig on page
A
SECTION 1
SERVICE NOTE
Screws (Black)
A
1-7
Shoot the barcode
Format is JPEG
Application Software
UHDBUDecode.exe
Data convert from JPEG TEXT
B
A
Save the TEXT(.txt) data
USB memory is connected to USB port on
the front unit, and the TEXT data as new
data is loaded to unit by Service Mode
Upper Case
Slide the upper case
to back.
1-1