Advertisement
E) While holding the syringe vertical, pointed up, wrap some paper towel around the tip
of the Bottom Fill Adapter, and carefully push on the syringe to remove any air
trapped in the top of the syringe. If you push too hard, ink will shoot up to the
ceiling, be very gentle.
F)
Now that the air is gone, adjust the volume of ink in the syringe so that you have the
amount shown in the above table. Hold the syringe tip over the open ink bottle and
push the syringe plunger until you have the bottom of the rubber plunger at the right
mark.
G) Hold the cartridge being filled at eye level, keeping the cartridge orientated in its
normal position. Insert the tip of the Bottom Fill Adapter into the exit port on the
bottom of the cartridge. Don't turn the cartridge upside down. Push the tip firmly
into the exit port and slowly inject the ink into the cartridge.
Keep the cartridge at a 45 degree angle, front down, for the first half of the ink
injection. Then, for the second half, keep the cartridge level. Never turn cartridge
upside down.
S a v e
M o n e y
MIS Associates Inc
http://www.inksupply.com
a n d
I m p r o v e
2901 Auburn Rd
Fax: 248-289-6013
Y o u r
Auburn Hills, MI 48326
Email: sales@inksupply.com
P r i n t i n g
800-445-8296
Advertisement
