Denon DVD-3800 Service Manual page 6

2-2. When the Disc Tray cannot be ejected electrically
(1) After removing the Top Cover, proceed as
follows.
(2) Remove 2 screws
5
Bracket and 2 bottom screws
(3) Turn the Trans. and Bracket to the arrow
direction, then remove 2 screws
(4) Move the Trans. toward the Front Panel.
(5) Insert a screwdriver
the Mecha. Fix Bracket, and push the Plate
Gear of the DVD Mecha. slowly to open
the Disc Tray.
(6) Remove the Loader Panel, and close the
Disc Tray.
(7) Detach the Front Panel following the same
steps described on the previous page 2-1.
(5)~(7).
Trans. Bracket
on the Trans.
6 .
7 .
into the left hole of
Mecha. Fix Bracket
5
6
Trans.
DVD Mecha.
Loader Panel
DVD-3800
Front Panel
7
Front Panel
Plate Gear
screwdriver
6