Adjustment; Loading Color Parameter - Casio QV-770 Service Manual

1-1. Loading color parameter

Execute when replacing camera unit
Load parameter in memory of camera unit. (Light box not needed.)
(1) Set QV-770 to "PLAY" mode. (Computer communication does not work in "REC" mode.)
(2) Connect QV-770 and PC with link cable RS-232.
(3) Operate adjustment software on MS-DOS.
PON773E. EXE
(4) Make sure PC's monitor indicates that loading parameter is complete.
Note: When done continue the program in the following order.
1. DEFECT CORRECT
2. STROBE ADJUST
***********************************
* Prameter Installer
* for KX-773
* Ver 1.60
***********************************
[OK]
Loading Parameter to Flash Memoty....OK.
Verifying data.....OK.
Adjustment complete.
Notes: • When NG is displayed check connections and settings.
• Use AC adapters.
To
RS-232C port
Link cable
To digital terminal
QV-770

ADJUSTMENT

*
*
*
[NG] (example 1)
[NG] (example 2)
PC
— 3 —
Display when Failure occurs.
* * * Time Out Error
Verify error unable to load parameter.
Check camera.
* * *