Color Adjustment - Casio QV-30 Service Manual & Parts List

For ntsc

Hide thumbs Also See for QV-30:

Owner's manual (18 pages)

Owner's manual (18 pages)

Owner's manual (18 pages)

Table Of Contents

Table of Contents

Each of this model has a color information in its flash memory due to the CCD camera has a color characteristic.

The color information is loaded in the flash memory when the color adjustment is done after assembling of this

model in our factory. A brand-new flash memory and digital PCB ass'y stocked in our spare parts center do

not have the color information, so the color adjustment should be done after the following situation.

• Replacing the digital PCB ass'y with the brand-new one

• Replacing the flash memory with the brand-new one

And it also should be done, after the following situation due to change of the color characteristic.

• Replacing the camera unit

The following items are required for the color adjustment.

• PC

• QV-30 support utility disk

• Light box

• Color filter

• Cable and adapter for LK-1 connection kit

Notes: • The support utility disk for QV-30 does not work for QV-30.

• Use an AC adapter for the power source of the QV-30 to avoid the failure of the adjustment.

• QV-30 support utility disk is supplied from CASIO. Please contact to Technical Dept., Overseas

Service Div.

• The light source and color filter are available in our spare parts center. Please order to our spare parts

div.

Preparation for the color adjustment

1. Copy the ADJ724.EXE file from the support utility disk to the hard disk in the PC.

2. Connect QV-30 to the RS-232C serial port (COM1) of PC with the cable for LK-1.

IBM-PC